Got a Tree Coming Down? How to Save the Log for Lumber

Where a tree gets cut decides what it is worth. A good saw log is long and straight, at least 8 feet, which is the shortest log our mill can clamp, and at least 10 inches across. If a tree is coming down on your place and you want lumber out of it, a few decisions before the saw starts make all the difference.
Where to cut
Cut above the root flare, keep the trunk as long and straight as you can, and stop below the first big fork. If the top is dead or ugly, save the straight part. Two short logs beat one firewood pile.
Limbs are not saw logs. A limb spends its whole life fighting gravity, so the wood is built crooked on the inside, and a board cut from it will move every time. Not sure what you have? Send us a photo before the saw comes out.
Having us mill it
Yes, we will mill it for you. Fill out the cut list first so we know what you are after, then bring it in. Custom milling is $300 an hour with a $300 minimum.
Selling it to us
We buy mill logs on the Doyle scale. Softwood needs to be at least 12 feet long and 8 inches on the small end, and hardwood can be 8 feet. Higher grade hardwood (not elm) can bring up to $1.50 a board foot, and softwood pays less. Scale it and send it over, with photos, on our sell us your logs page.
About metal
Yard trees eat things: nails, fence wire, old hardware. We have pulled a surprising amount of steel out of logs that were "free of steel." If the blade finds it, it is $50 a blade.
Cutting it down
We do not cut trees down. For that, call a tree service. Stronghold Tree Care and SouthWest Tree Service in Olathe are both good. Ask them to leave the trunk long.
970-440-1491
Get a quote
